Coordination with the organizations, regulated the energy relations (as to assembly, reconstruction, control, supervision) such as:

• AEK «Kievenergo Cable networks»;
• SPP «Energosbyt Kievenergo»;
• National commission on the regulation of electrical energy of Ukraine in Kiev;
• Perspective development management of AEK "Kievenergo”;
• State inspection on the energy supervision at the consumption modes of electrical and heat energy in Kiev;
• Main architecture and design department in Kiev;
• Main improvement control department in Kiev;
• State inspection on the industrial safety and labor protection in energy sector;
• And others licensing and control organizations.

2.1.

ENERGETIC  – the solving of tasks on the energy distribution
from the power plant to the end consumer

• high (110 kV) and middle voltage (10-35 kV) (distribution slots) – MV

• line transformers

2.2.

ТТА-SYSTEMS Energy distribution systems 0,4 kV

• Energy distribution systems 0,4 kV – Board production in Kiev Switchgear-0,4 to 7400А – licensed partner of the franchise program Sivacon 8PT Siemens AG, control boards and others

• Busbar systems  (internal and external using) to 6300А 0,4 kV, IP31, IP 54, IP 68 LICENSE Siemens AG

2.3.

Automation, controlling and dispatching

• Totally Integrated Automation – systems of automation, controlling and dispatching on the bases of programmed controllers SIMATIC of SIEMENS (Germany) production.

2.4.

Systems of backup and independent power supply - diesel engines

• Cummins (Great Britain) diesel-engine from 10kVA to 3325kVA;
• Cummins (Great Britain) gas engine generator plants from 315kWt to 2000kWt;
• Cummins (Great Britain) cogeneration gas powered electrical generator;
• Cummins (Great Britain) biogas generator sets;
• АРС (USA) no-break power supplies (UPS) from 1kVА to 1600kVA;
• Volter (Ukraine) voltage stabilizer from 2kWt  to 200kWt;
• Europower (Belgium) portable power plants from 2kWt to 16kWt;

3.1

Systems of power supply and automation of the enterprise in general.

3.2

The service possibility for equipment and systems elaborated and implemented at the enterprise by other contractors (including by the western ones – the technological lines) on the bases of the components of SIEMENS production.

4.1.

The standby equipment store in Kiev (components of SIEMENS production);

4.2.

The supply of the electro technical equipment of other producers (cable and conducting production, lighting production, wiring production, accessories and other).

4.3

The Logistics Department and automobile park (store area 7000m) for providing the operative delivery of electro technical equipment for enterprise power systems.

5.1.

Staff training of the enterprise, on operating the implemented system of power distribution and object automation on the bases of the SIEMENS components, designed by SPO Sineps-Invest.

5.2.

The providing of technical support for design and installation organizations.

6.1.

Certificate ISO 9001-2001 (9001:2000)

6.2.

The company has a state license for the design, installation and commissioning works № AB - 515973

6.3.

License for board production 0,4 kV according to SIVACON 8PT technology

6.4.

License for busbars design and installation according to SIVACON 8PS technology

6.5.

License for E-plan design

6.6.

All equipment is certified in Ukraine and has the quality certificates.

6.7.

License for transportation and others.

7.1.

Qualification test for installed electrical equipment in compliance to the regulatory and design documentation requirements.

7.2.

Resistance test of ground loop current spreading and transition resistance of grounded equipment.

7.3.

Resistance test of insulation of cables, wiring, sets and equipment, etc.

7.4.

Measurement of contact connections’ transition resistance

7.5.

Measurement of total resistance of kink “phase zero”

7.6.

Aptitude test of circuit breakers, switchboard equipment

7.7.

Insulation test of mains frequency with high voltage

7.8.

Thermo-diagnostic of electrical contact connections

7.9.

Repair and adjustment of high-voltage switchgear equipment of 10 kV (Switchgear -0.4 kV) and transformer substations

8.1.

The integrated approach principle based on the latest industrial technologies using advanced software (E-Plan) and design trends is using during design works.

8.2.

Simaris Design – software for the calculation of electric networks.

8.3.

Simaris SIVACON –switchboards design

8.4.

Busbar plan –busbar systems design

8.5.

Drives design

9.1.

Siemens AG

9.2.

DP «Moeller Ukraine»

9.3.

Rittal

9.4.

Wiedmuller

9.5.

Vergokann

9.6.

Bals

9.7.

Cummins